[Introduction]: JJF flotation cell is a air self-suction mechanical stirring floatation cell without slurry suction (Referring to the design of USA wemco flotation machine)
[Improvement]: Shallow groove, the stator lower than the impeller, large slurry circulation volume, low energy consumption; the stator is a cylinder with an elliptical hole which is conducive to the dispersion and mixing of pulp and air. Umbrella shaped dispersion cover with hole keeps the pulp surface stable.
Large pulp circulation volume up to 2.5 times, is conducive to mineralization of pulp, reagents and air;
Large air suction volume, good dispersion effect;
Reasonable circulation of mineral slurry and the solid particles suspend well, no sediment in tank, and no need to feed mine when it stopped;
Wide range of particle size and high recovery rate of ore selection;
Mechanical agitation; self-air suction but not slurry; ladder is necessary during processing (drop height: 300-400 mm);
When the JJF mechanical agitation flotation machine is working, vortexes are generated in the vertical tube and the draft tube. This vortex forms a negative pressure and sucks the air from the air inlet pipe. It is in the impeller and stator area with the slurry sucked in through the draft tube. mixing. The slurry-gas mixed flow is moved in a tangential direction by the impeller, and then converted into radial movement by the action of the stator, and is evenly distributed in the flotation cell. The mineralized bubbles rise to the froth layer and are scraped out unilaterally or bilaterally to form froth products.
|Motor Power for Agitation (kW)||Motor Power for Scraper (kW)||Single Tank Weight (kg)|